Original
By certification 
Product Introduction:Easy Servo Drive HS806AC
HS806AC Hybrid servo( closed loop stepper) is based on the latest DSP technology and advanced control algorithm of combing brushless servo and stepper systems. It combines favored features of both open loop stepper and brushless servo drives, solve the fatal problem “loss of steps” of open loop step systems ,improve the stepper motor high speed performance, and motor & drive heating and noise are also significantly improved.
Compared with brushless servo systems, they have much higher starting and low-speed torque, high standstill stiffness, no hunting, no overshooting, almost zero settling time, and no tuning for almost for all applications.
Product Features:Easy Servo Drive HS806AC
●all digital vector control
●full close loop control ,no lost step
●high speed ,the max speed up to 4500RPM
●fast start/stop, no ACC/DEC to 3000rpm
●good performance at smoothness ,low noise and vibration
●about 100% power output, low heat
●the response frequency is 300KHZ
●overcurrent , undervoltage, overvoltage, position error protection
Applications:Easy Servo Drive HS806AC
The main applications are cnc router, plasma/flame cutting ,robot, laser , advertising equipment, Packaging Equipment, etc.
Mounting（unit：mm）
Function description:Easy Servo Drive HS806AC
DIP settings
SW1：current loop setting，OFF：low value；ON：high value
SW2：position loop，OFF：low value；ON：high value
SW3：the max peak current setting: OFF：the max current 5.0A；
ON：the max current 6.5A
SW4：motor direction，OFF：CW；ON：CCW
SW5~SW8：Micro step setting，
Pul/rev |
SW5 |
SW6 |
SW7 |
SW8 |
400 |
ON |
ON |
ON |
ON |
800 |
OFF |
ON |
ON |
ON |
1600 |
ON |
OFF |
ON |
ON |
3200 |
OFF |
OFF |
ON |
ON |
6400 |
ON |
ON |
OFF |
ON |
12800 |
OFF |
ON |
OFF |
ON |
25600 |
ON |
OFF |
OFF |
ON |
51200 |
OFF |
OFF |
OFF |
ON |
1000 |
ON |
ON |
ON |
OFF |
2000 |
OFF |
ON |
ON |
OFF |
4000 |
ON |
OFF |
ON |
OFF |
5000 |
OFF |
OFF |
ON |
OFF |
8000 |
ON |
ON |
OFF |
OFF |
10000 |
OFF |
ON |
OFF |
OFF |
20000 |
ON |
OFF |
OFF |
OFF |
40000 |
OFF |
OFF |
OFF |
OFF |
Interface
Name |
Function |
Description |
POWER |
Power light |
When power on ,the light is on |
ALARM |
Overcurrent/undervoltage/ overvoltage light |
When the drive show alarm, the light is on |
PLS+ |
Pulse + |
Pulse signal, the range is +5V-+24V,if more than+5V,it need connect resistor |
PLS- |
Pulse- |
Low level is 0-0.5V,high level is 4-5V,pulse width >2us |
DIR+ |
Direction+ |
Direction signal, the range is +5V-+24V,if more than+5V,it need connect resistor |
DIR- |
Direction- |
Low level is 0-0.5V,high level is 4-5V,pulse width >2us |
ENA+ |
Motor enable |
the range is +5V-+24V,if more than+5V,it need connect resistor |
ENA- |
Motor Enable- |
Low level is effective ,if it’s effective ,the drive stop working, the motor disable |
PEND+ |
Position end+ |
Motor reach the specified position ,output a signal. PEND+ connect to Vcc, PEND- connect to the controller input. The max current is 50MA |
PEND- |
Position end- |
|
ALM+ |
Alarm+ |
When the drive show alarm, the alarm output is on .ALM+ connect to Vcc, ALM– connect controller input。The Max current is 50MA |
ALM- |
Alarm- |
|
PB+/PB- |
Encoder B phase |
Encoder B phase input |
PA+/PA- |
Encoder A phase |
Encoder A phase input |
VCC/GND |
Encoder Power supply |
Encoder Power supply(5V) |
AC1 |
AC power input |
AC24-80V |
AC2 |
AC power input |
|
A+,A- |
Motor A phase |
Motor A phase，the phase sequence should be correct |
B+,B- |
Motor B phase |
Motor B phase, the phase sequence should be correct |
！Notice
A、The input power supply can not over AC80V。
B、The command signal is 5V ,if it is more than 5V ,please connect resistor
C、When the Alarm light is on ,please power off and check
a. the power range is 24VAC---80VAC ；
b. the motor wiring and encoder wiring ,check is there any short
Product Service:Easy Servo Drive HS806AC
ECON provide technical service from start to end,and will offer one year warranty. Any problem,can send e-mail to our technical engineer and sales,or directly chat on our website.
Payment and Delivery:Easy Servo Drive HS806AC
ECON supports T/T,Paypal,Western Union to make payment. We can arrange express,air and sea shipment,we have professional team to deal with logistic.
Recommendations:Easy Servo Drive HS806AC
