Infrared Lighting CE certified Drive-In test chamber
Custom Systems for Vehicle Testing
Environmental testing of automobiles requires additional consideration of the facility where the chamber will be installed, and its planned use. Test methods for vehicles can include additional conditions besides temperature and humidity in an attempt to simulate real-world conditions.
Chassis Dynamometer or Four-post road simulatorGrande builds special floor interfaces to allow use of these additional types of equipment supplied by other vendors.
Infrared LightingESPEC builds infrared systems to create radiant surface heating of vehicles to look for deformation and other quality problems. These systems can be adjusted vertically and angled to ensure even coverage.
Running vehicleFrom cold-start to high-heat stress, a running engine is a common need, but complicated requirement fresh air must be conditioned and introduced to the chamber to make up for that used in combustion. Also the exhaust must be safely removed from the chamber.
Features
●Stainless steel interior
●Heavy-duty flooring to support vehicles
●Painted galvanized steel exterior for long life
●Large doors
●Special MAP system with larger refrigeration and additional airflow capability
●MAP service doors are hinged (no tools or lifting)
●Easy access to frequently checked refrigeration components
●Customization to suit additional test requirements
Technical parameters
Model |
Drive-in test chamber |
||||
Inner chamber size W*H*D(mm) |
Please refer to size chart, customization service available |
||||
Exterior chamber size W*H*D(mm) | |||||
Temperature Range |
0℃,-20℃,-40℃,-60℃~+70℃(+150℃) |
||||
Humidity Range |
10%-95%RH |
||||
Performance |
Temp.&Humi.Fluctuation |
±0.3℃, ±2.5%RH |
|||
Temp.&Humi.Uniformity |
±2℃,±5%RH |
||||
Temp.&Humi.Resolution |
0.1℃, 0.1%RH/0.01,0.1%RH |
||||
Heat up time(20℃~high temp.) |
℃ |
80 |
|||
minutes |
50 |
||||
Cool down time(20℃~low temp.) |
℃ |
0 |
-20 |
-60 |
|
minutes |
55 |
70 |
150 |
||
Material |
Exterior chamber material |
Stainless steel plate+ Power Coated |
|||
Inner chamber material |
SUS#304 stainless steel plate |
||||
Insulation |
PU& Fiberglass wool |
||||
System |
Wind Circulation |
Sirocco fan |
|||
Heating system |
SUS#304 stainless steel high-speed heater |
||||
Humidifying |
Surface evaporating system |
||||
Cooling |
Imported compressor, finned type evaporator, air-cooling condenser |
||||
Dehumidifying |
ADP critical dewpoint cooling/dehumidifying method |
||||
Controller |
Digital electronic indicators +S.S.R.with PID automatic calculation capability |
||||
Other Components |
Vaccum glass inspection window, cable port(50mm), control status indicator lights, |
||||
Safty Devices |
Overheating circuit-breaker,compressor overload protection,control system overload |
||||
Power Supply |
AC3φ380V 60/50Hz |
||||
Customization |
Customization of inner chamber size, tempreture&humidity range,ect. |
Grande Electronics is one of the largest chassis dynamometer or four-post road simulator drive-in test chamber manufacturers and suppliers in China and also known as one of the famous chamber brands. Our discount product is mainly featured by good performance and flexibility and low price. Welcome to order the customized and cheap chamber made in China with our factory.