Pressure Transmitters
E+H PMP71 Absolute and gauge pressure transmitter
2017-12-06 18:20  Visit:111
Price:Unfilled
Send inquiry

Your benefits

  • Very good reproducibility and long-term stability
  • High reference accuracy: up to ±0.075%, as PLATINUM version: ±0.05%
  • Turn down 100:1, higher on request
  • Used for process pressure monitoring up to SIL3, certified according to IEC 61508 by TÜV SÜD
  • HistoROM®/M-DAT memory module
  • Function-monitored from the measuring cell to the electronics
  • Continuous modularity for differential pressure, hydrostatic and pressure (Deltabar S, Deltapilot S, Cerabar S), e.g.
    - replaceable display
    - universal electronic
  • Quick commissioning thanks to quick setup menu
  • Menu-guided operation
  • Extensive diagnostic functions

Cerabar S PMP71 with MID Parts Certificate:

Pressure transmitter with metal sensors

Overload-resistant and function-monitored; Communication via HART; Subcomponent suitable for custody transfer measurement with NMi approval

 

Your benefits:

  • Very good reproducibility and long-term stability
  • High reference accuracy: up to ±0.075%, as PLATINUM version: ±0.05%

  • Used for process pressure monitoring up to SIL3, certified to IEC 61508 by TÜV SÜD

  • HistoROM®/M-DAT memory module

  • Function-monitored from the measuring cell to the electronics

  • Quick commissioning with Quick Setup menu

    Menu-guided operation

Field of application

The Cerabar S pressure transmitter is used for the following measuring tasks:

  • Absolute pressure and gauge pressure in gases, steams or liquids in all areas of process engineering and process measurement technology
  • Level, volume or mass measurement in liquids
  • High pressure up to 700 bar
  • International usage thanks to a wide range of approvals

Cerabar S PMP71 with MID Parts Certificate:

Cerabar S serves as a component of a system suitable for custody transfer measurement, for highly accurate measurement of pressures, and finds application in

custody transfer. It satisfies the applicable requirements in accordance with OIML R117-1 Edition 2007 (E) and EN 12405-1/A1 Edition 2006.

 

The Parts Certificate is issued on the basis of the following standards:

  • WELMEC guide 8.8 "General and Administrative Aspects of the Voluntary System of Modular Evaluation of Measuring instruments under the MID".
  • OIML R117-1 Edition 2007 (E) "Dynamic measuring systems for liquids other than water".
  • EN 12405-1/A1 Edition 2006 "Gas meters – Conversion devices – Part 1: volume conversion".

www.chinaguiding.com/Product/7943514814.html

Message

TO: xhmetcl6687

E-mail:

Content:

Contact information
Comment
0